Moxa Industrial Wireless Access Point w/ 802.11a/b/g/n, IP68, US Band (extended temperature model)

WLAN Interface
Standards   IEEE 802.11a/b/g/n for Wireless LAN
IEEE 802.11i for Wireless Security
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT
IEEE 802.3af for Power-over-Ethernet
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1Q for VLAN
Spread Spectrum and Modulation (typical)   - DSSS with DBPSK, DQPSK, CCK
- OFDM with BPSK, QPSK, 16QAM, 64QAM
- 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, DBPSK @ 1 Mbps
- 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps, QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps
- 802.11n: 64QAM @ 300 Mbps to BPSK @ 6.5 Mbps (multiple rates supported)
Operating Channels (central frequency)   US:
2.412 to 2.462 GHz (11 channels)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.320 GHz (4 channels)*
5.500 to 5.700 GHz (8 channels, excluding 5.600 to 5.640 GHz)*
5.745 to 5.825 GHz (5 channels)
EU:
2.412 to 2.472 GHz (13 channels)
5.180 to 5.240 GHz (4 channels)*
5.260 to 5.320 GHz (4 channels)
5.500 to 5.700 GHz (11 channels)*
JP:
2.412 to 2.484 GHz (14 channels)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.320 GHz (4 channels)*
5.500 to 5.700 GHz (11 channels)*
*DFS (Dynamic Frequency Selection) channel support   In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
Security   - SSID broadcast enable/disable
- Firewall for MAC/IP/Protocol/Port-based filtering
- 64-bit and 128-bit WEP encryption, WPA /WPA2-Personal and Enterprise (IEEE 802.1X/RADIUS, TKIP and AES)
Transmission Rates   802.11b: 1, 2, 5.5, 11 Mbps
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n: 6.5 to 300 Mbps (multiple rates supported)
TX Transmit Power   802.11b:
- Typ. 26±1.5 dBm @ 1 Mbps, Typ. 26±1.5 dBm @ 2 Mbps
- Typ. 26±1.5 dBm @ 5.5 Mbps, Typ. 25±1.5 dBm @ 11 Mbps
802.11g:
- Typ. 23±1.5 dBm @ 6 to 24 Mbps, Typ. 22±1.5 dBm @ 36 Mbps
- Typ. 20±1.5 dBm @ 48 Mbps, Typ. 19±1.5 dBm @ 54 Mbps
802.11n (2.4 GHz):
- Typ. 23±1.5 dBm @ MCS0/8 20 MHz, Typ. 18±1.5 dBm @ MCS7/15 20 MHz
- Typ. 23±1.5 dBm @ MCS0/8 40 MHz, Typ. 17±1.5 dBm @ MCS7/15 40 MHz
802.11a:
- Typ. 23±1.5 dBm @ 6 to 24 Mbps, Typ. 21±1.5 dBm @ 36 Mbps
- Typ. 20±1.5 dBm @ 48 Mbps,Typ. 18±1.5 dBm @ 54 Mbps
802.11n (5 GHz):
- Typ. 23±1.5 dBm @ MCS0/8 20 MHz, Typ. 18±1.5 dBm @ MCS7/15 20 MHz
- Typ. 23±1.5 dBm @ MCS0/8 40 MHz, Typ. 18±1.5 dBm @ MCS7/15 40 MHz
Note   Based on regional regulations, the maximum transmission power allowed on the UNII bands is restricted in the firmware, as per the following list:
Table
RX Receive Sensitivity   802.11b:
- -93 dBm @ 1 Mbps, -93 dBm @ 2 Mbps
- -93 dBm @ 5.5 Mbps, -88 dBm @ 11 Mbps
802.11g:
- -88 dBm @ 6 Mbps, -86 dBm @ 9 Mbps
- -85 dBm @ 12 Mbps, -85 dBm @ 18 Mbps
- -85 dBm @ 24 Mbps, -82 dBm @ 36 Mbps
- -78 dBm @ 48 Mbps, -74 dBm @ 54 Mbps
802.11n (2.4 GHz):
- -70 dBm @ MCS7 20 MHz, -69 dBm @ MCS15 20 MHz
- -67 dBm @ MCS7 40 MHz, -67 dBm @ MCS15 40 MHz
802.11a:
- -90 dBm @ 6 Mbps, -88 dBm @ 9 Mbps
- -88 dBm @ 12 Mbps, -85 dBm @ 18 Mbps
- -81 dBm @ 24 Mbps, -78 dBm @ 36 Mbps
- -74 dBm @ 48 Mbps, -72 dBm @ 54 Mbps
802.11n (5 GHz):
- -69 dBm @ MCS7 20 MHz, -71 dBm @ MCS15 20 MHz
- -63 dBm @ MCS7 40 MHz, -68 dBm @ MCS15 40 MHz
- Protocol Support
General Protocols   Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, DHCP, VLAN, STP/RSTP
- Interface
Default Antennas   2 dual-band omni-directional antennas, 5 dBi at 2.4 GHz, 2 dBi at 5 GHz, N-type (male)
Connector for External Antennas   N-Type (female), 500 V insulation
LAN Ports   1, RJ45, 10/100/1000BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
Console Port   RS-232 (waterproof RJ45-type)
Reset   Present
LED Indicators   PWR, FAULT, STATE, WLAN, LAN
Alarm Contact (digital output)   M12 connector, 1 relay output with current carrying capacity of 1 A @ 24 VDC
Digital Inputs   M12 connector, 2 electrically isolated inputs- 13 to 30 V for state -1-
- 3 to -30 V for state -0-
- Max. input current: 8 mA
- Management
Device Management   Wireless Search Utility, MXconfig, SNMP
Network Monitoring   MXview
- Physical Characteristics
Housing   Metal, IP68 protection
Weight   1400 g (3.09 lb)
Dimensions   224 x 148 x 67 mm (8.82 x 5.82 x 2.62 in)
Installation   Wall mounting (standard), DIN-rail mounting (optional), pole mounting (optional)
- Environmental Limits
Operating Temperature   -40 to 75°C (-40 to 167°F)
Storage Temperature   -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity   5% to 95% (non-condensing)
- Power Requirements
Input Voltage   12 to 48 VDC, redundant dual DC power inputs or 48 VDC Power-over-Ethernet (IEEE 802.3af compliant)
Input Current   0.64 A @ 12 VDC; 0.16 A @ 48 VDC
Connector   M12 A-coding connector (male), 500 V insulation
Power Consumption   7.68 W
Reverse Polarity Protection   Present
- Standards and Certifications
Safety   UL 60950-1, EN 60950-1
EMC   EN 61000-6-2/6-4
EMI   CISPR 22, FCC Part 15B Class B
EMS   IEC 61000-4-2 ESD: Contact 8 kV; Air 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power 2 kV; Signal 1 kV
IEC 61000-4-5 Surge: Power 2 kV; Signal 1 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8
Radio   EN 301 489-1/17, EN 300 328, EN 301 893, TELEC, FCC ID SLE-WAPN008

AWK-4131A-US-T Moxa Industrial Wireless Access Point

Condição de AWK-4131A-US-T: novo em embalagem comercial

Tags de AWK-4131A-US-T: AWK-4131A-US-T, Moxa AWK-4131A-US-T, Access Point Moxa, Roteador Moxa, Roteador Wireless Moxa AWK-4131A-US-T, Roteador Moxa AWK-4131A-US-T, AWK4131AUST, AWK-4131A, MOXA