Condição de CPK1000IL: novo em embalagem antiestática
Introducing the Byte Brothers Cable and Power Kit - CPK1000IL. The only kit that handles both the cables and power! It combines the Real World Certifier digital cable tester with a Double Jack Inline Power Panel Cat5/6 DVM. This kit gives you the high performance Real World Certifier (with 250 report storage) and the Power Panel Cat5/6 DVM at a terrific savings. It has everything you need to thoroughly test cables and devices plus determine exactly what is on your Cat5/6 cable. And, if you work with PoE, you can test for voltage and test the operation of your PoE voltage source. The CPK1000 Kit contains both the RWC1000K and POE1000IL.
Byte Brothers Power Panel - Model POE1000IL. CAT5/6 cables are jammed with data, phone, surveillance cameras and now 48 volts of PoE (Power over Ethernet)...the Power Panel Cat5/6 DVM spots these devices. And, two interactive buttons exercise both LAN switches and the Power over Ethernet (PoE) ports. All Power Panels come with a port beacon feature and tone generator to help locate ports and wires. If you are an installer of VoIP phones or IP cameras, the Power Panel will soon become your favorite tool.
Features:
Model: POE1000IL Inline Power Panel
Locate network ports by turning on the port beacon feature
Locate active network devices and display capabilities - includes VoIP phones, IP cameras, access points, switches, NIC cards. The Standard Unit displays the advertised speed (10/100/000) and duplex. Location on cable is also displayed. Displays the negotiated speed between two devices. Negotiated speed is possible because these models can be connected inline between two devices.
Locate phones, FAXs, modems, PBXs - Voltage and location on cable are displayed
Locate Power over Ethernet (endspan and midspan) - Voltage and location on cable are displayed (includes both discovery voltage and full voltage)
Simulate a PoE device - Press the Test PoE button to simulate a VoIP phone, IP camera or other PoE device connection
Tone and trace cables - Locate cable runs by placing a tone on one end of the cable with the Main Unit and detecting the tone on the far side with a tone probe (not included). The tone generated is compatible with most probes.
Power pass thru - The two jack design of the inline unit allows the tester to be connected in between (inline) the two devices. This allows the PoE power to be passed to the PoE device so it can powered the line is tested.
Measure PoE device power draw - Connect the Main Unit inline between the device and the power source (switch) and measure the power draw of the device (in watts). Too much power draw is the number one reason for IP/PoE network failure
Includes: POE1000IL, Auto shutoff, and 9V battery
Note: The inline version has two jacks so it can go in between two devices and power the device and measure power draw (in watts).
Test CAT5/6 Cables (UTP):
Shorts, distance to short
Opens, distance to open
Cable length (in feet)
Wiremap (IEEE 802.3 pairs)
Split pairs
Crosstalk (NEXT/FEXT) digitally on a PASS/FAIL basis
Propagation delay and skew per pair
Cable Category bar graph (CAT3 thru CAT 6) - The most popular test performed by the RWC determines cable category by digitally pulsing the cable and analyzing the cable parameters that affect speed. The RWC differs from the EIA/TIA standard because it tests with digital pulses, not sinewaves, yet the RWC results are accurate and greatly improve cable installation practices.
Speed - Bar graph shows predicted cable speed (10M, 100M, 1000M)
Test Coax Cables:
Short, distance to fault
Open, distance to fault
Cable length (in feet)
Test Network Devices:
The RWC displays link speed, duplex and data levels of network gear. Data level is displayed via a bar chart with the IEEE minimum voltage shown.
Determine speed and duplex (advertised speed)
Connect inline and determine speed and duplex of two devices (negotiated speed)
Test port data level (to meet minimum IEEE standards)
Cable and Port Locator:
The RWC displays link speed, duplex and data levels of network gear. Data level is displayed via a bar chart with the IEEE minimum voltage shown.
Locate both UTP and coax cable with tone. The Main Unit applies the tone and the probe detects it.
Locate connected ports with the port beacon feature. The Main Unit pulses the connected port and blinks the ports LED.
Store and Print Test Results:
250 Reports - Store up to 250 test results in the RWCs flash memory for late transfer to your PCs Excel spreadsheet program
Email or print reports - Because the report is Excel, it can be easily emailed to your customer or printing is always an option
Automatically named - Reports are named sequentially 1-250 but you can add up to 16 characters of a custom naming per test
Combined report - The RWC can combine cable test data with network device testing data into a single report. In other words, results of a cable test can be combined with the test results from a network device using the same cable.
INCLUDES:
1 - RWC1000 Main Unit
1 - RWC1000 Remote Unit
1 - Power Panel CAT 5/6 DVM
2 - CAT 6 Patch Cables
2 - RJ45/coax adapters
1 - Printer/PC Cable (6)
1 - Protective case (zippered)
1 - Welcome DVD
3 - 9V batteries
1 - User Manual
CPK1000IL Byte Brothers Testador de Rede CAT 3/5/5E/6 TDR
Condição de CPK1000IL: novo em embalagem antiestática
Tags de CPK1000IL: real TDR, BBR-CPK1000IL, RWC1000K, Cable Certifier, RWC1000K, POE1000, teste de rede, testador de rede, lan tester, teste para rede, NT1150, DTX-1800, MS2-100, CIQ-100, VDV501828, DTX-1500INTL, DTX-1500, MS2-KIT, Byte Brothers, Testador Rede, Testador CAT5, Testador CAT6, Cable and Power Test Kit, Byte Brothers