VPORT364A Codificador de Vídeo Industrial Moxa

DESCRIPTION:

The VPort 364A is a 4-channel industrial video encoder that supports the H.264 video compression algorithm, which uses less bandwidth than other video compression standards; the VPort 364A provides the best video quality available on the market today. In addition, the VPort 364A supports simultaneous dual video streams with different formats: H.264 and MJPEG. The two video streams can be used for different purposes, such as viewing, recording, or analysis. In addition, the rugged industrial design with -40 to 75°C operating temperature, built-in fiber Ethernet ports, IP30 form factor protection, and industrial certifications, make the VPort 364A highly suitable for use in harsh environments.

 

FEATURES:

- Dual simultaneous H.264 and MJPEG video streams

- Video latency under 200 ms

- Moxa DynaStream™ function supported for network efficiency

- OnVIF supported for standardization and interoperability (after firmware V2.0)

- 802.1X and SSL/SSH for advanced network security

- Industrial design with -40 to 75°C operating temperature

- VPort SDK PLUS provided free

• Video Video Compression H.264 (MPEG4 part 10, AVC) or MJPEG Video Inputs 4, BNC connector (1.0 Vpp, 75 ohm) Video Streams Dual streams (one for H.264, the other for MJPEG) NTSC/PAL Manual • Video Resolution and FPS (frames per second) in single video stream Video Viewing • DynaStream supported for changing the video frame rate  automatically • Adjustable image size and quality • Timestamp and text overlay • Audio Audio Inputs 1, Line-in or MIC-in with RCA connector Audio Outputs 1, Line-out with RCA connector Audio Format Mono, PCM • Network Protocols TCP, UDP, HTTP, SMTP, FTP, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, SNMPv1/v2c/v3, DDNS, Modbus/TCP, 802.1X (Pending), SSL/SSH (Pending) Ethernet 1 10/100BaseT(X) auto negotiating RJ45 port, or 1 100BaseFX fiber port (single/multi-mode, SC connector) • Serial Port PTZ Ports 1, RS-232/422/485 port (5-pin terminal block connector), max. speed of 115.2 Kbps Console Port 1 RS-232 RJ45 port • GPIO Digital Inputs 4, max. 8 mA  Low: +13 V to +30 V; High: -30 V to +3 V Relay Outputs 2, max. 24 VDC @ 1 A • LED Indicators STAT System status PWR1 Power 1 PWR2 Power 2 FAULT Can be configured to correspond to system alarm, power failure, or disconnected network V1, V2, V3, V4 Video input signal activity for channels 1 to 4 • Power Requirements Input Voltage 2 12 VDC or 24 VDC/VAC inputs for redundancy, terminal block connector Power Consumption Max. 7.5 watts • Physical Characteristics Housing Metal, IP30 protection Dimensions 80.2 x 135 x 105 mm (3.16 x 5.31 x 4.13 in) Weight 1110 g Installation DIN-Rail mounting or panel mounting (with optional mounting kit) • Alarms Video Motion Detection Includes sensitivity tuning Video Loss Video loss alarm Scheduling Daily repeat timing schedule Imaging JPEG snapshots for pre/trigger/post alarm images Email/FTP Messaging Automatic transfer of stored images via email or FTP with event-triggered actions Custom Alarms HTTP event servers and CGI events for setting customized alarm actions Pre-alarm Buffer 24 MB per channel for JPEG snapshot images • PAN/TILT/ZOOM PTZ Camera Control Via RS-232/422/485 PTZ port PTZ Control Functions PAN, TILT, ZOOM, FOCUS, moving speed, preset position (max. 25 positions), and 24 custom commands PTZ Function Updates Driver upload supported Supported Device Protocols Pelco D, Pelco P, Dynacolor DynaDome, Cohu, Custom Camera Transparent PTZ Control Control PTZ cameras with legacy PTZ control panel or keyboard connected to a PC or VPort decoder • Security Password User level password protection Filtering By IP address Authentication 802.1X (Pending) Encryption SSL/SSH (Pending) • Environmental Limits Operating Temperature Standard Models: 0 to 60°C (32 to 140°F)  Wide Temp. Models: -40 to 75°C (-40 to 167°F) Storage Temperature -40 to 85°C (-40 to 185°F) Ambient Relative Humidity 5 to 95% (non-condensing) • Standards and Certifications EMI FCC Part 15 Subpart B Class A, EN 55022 Class A EMS EN 61000-4-2 (ESD) Level 2,  EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 3, EN 61000-4-8, EN 61000-4-11 • MTBF (mean time between failures) Time 465,000 hrs Database Telcordia (Bellcore), GB 25°C   • System Requirements CPU Pentium 4, 2.4 GHz or above Memory 512 MB memory or above OS Windows XP/2000 with SP2 or above Browser Internet Explorer 6.x or above Multimedia DirectX 9.0c or above • Software Development Kit VPort SDK PLUS Includes CGI commands, ActiveX Control, and API library for customized applications or system integration for third-party developers (the latest version of SDK is vailable for download from Moxa’s website). Standard OnVIF (Pending)